Division 01 · Pumps

A pump is only as good as its fit to the line

We work from the duty point: fluid and concentration, flow, head, temperature, material, voltage, and available space. Magnetic-drive pumps address low-flow corrosive duty; ISO 2858 chemical pumps support footprint-based replacement; packaged sets combine pumps and controls for a defined interface.

Applications

Find the closest process page

If none of these pages match, describe the requirement directly. The page is a starting point, not a catalogue boundary.

Anodizing & Plating

Stop treating seal replacement as routine maintenance

In anodizing and plating lines, a mechanical seal in hot acid or plating chemistry can become a repeating maintenance item. A sealless magnetic-drive pump or a lined ISO 2858 pump changes the failure mode, the housekeeping burden, and the risk of losing expensive bath chemistry.

Open the application page

ISO 2858

Replace the pump, keep the pipework

ISO 2858 and DIN 24255 dimensions exist so a process pump can be replaced without rebuilding the line. The value is in the dimensional check: casing, suction, discharge, shaft height, baseplate, and coupling must be confirmed before a replacement is proposed.

Open the application page

Packaged Skids

One interface for the pump, baseplate, and controls

A packaged skid should reduce site work, not move it into a drawing package. We review the process duty, the mechanical layout, the control philosophy, and the boundary of supply before quoting a pump set or transfer package.

Open the application page

Pickling & Wastewater

Keep the acid moving without moving the leak downstream

Pickling lines and wastewater stations concentrate the two conditions that shorten pump life: corrosive chemistry and abrasive or crystallizing solids. The selection has to separate clear acid transfer from slurry-like wastewater and choose the right material, seal method, and installation arrangement for each.

Open the application page

Fit and boundaries

What we need, and what we do not claim

Fit conditions

  • Process data available: fluid and concentration, flow in m³/h, head in m, NPSH available, temperature in °C, and voltage/Hz.
  • Material and seal method can be selected from the medium and operating condition.
  • An existing pump footprint, drawing, or packaged-set interface can be shared by email after the first contact.

Exclusions

  • Refinery main-process packages requiring API 610 scope.
  • High-pressure reverse-osmosis stages beyond the range of the selected product family.
  • Heavy slurry duties and semiconductor-grade high-purity pumping.
  • Hazardous-area packages without a verified conformity assessment for the destination.

Qualification fields

  • Fluid name, concentration, and specific gravity.
  • Flow, head, temperature, and NPSH available.
  • Material, seal, and motor voltage/Hz.
  • Existing pump model or footprint drawing.
  • Destination country and site environment.

Next step

Request a pump selection review

Share the process data below. A specific medium, duty point, grade, or application method lets us confirm fit instead of guessing.

  • One low-friction next step: sample, drawing, selection, or quote.
  • Engineering questions come before price or delivery discussion.
  • No public file upload. Drawings and SDS files move by email after first contact.

Your details are used only to answer this inquiry. Read the Privacy notice.

No file uploads in this form. Reply to our email to share drawings, SDS files, or datasheets safely.