Anodizing & Plating

Stop treating seal replacement as routine maintenance

In anodizing and plating lines, a mechanical seal in hot acid or plating chemistry can become a repeating maintenance item. A sealless magnetic-drive pump or a lined ISO 2858 pump changes the failure mode, the housekeeping burden, and the risk of losing expensive bath chemistry.

The process problem

Anodizing & Plating

Sulfuric acid, plating baths, and rinse water attack standard seals and wetted parts. Every seal change takes the line down, creates hazardous waste, and puts bath chemistry at risk. The pump is often a small part of the line budget but a large part of unplanned downtime.

Scope

Tank circulation, acid transfer, rinse-water boosting, filtration loops, and chemical dosing on anodizing, electroplating, phosphating, and surface-treatment lines.

Product family

Magnetic-drive chemical pumps, lined ISO 2858 chemical pumps, and multistage stainless pumps for rinse-water boosting.

Qualification

Fit conditions and honest boundaries

The inquiry is useful only when the process data is specific enough to make a selection or reject the duty.

This page fits when

  • The fluid is a known acid, plating solution, rinse water, or dosing chemical with a stated concentration and temperature.
  • Flow and head are stable enough to select a fixed duty point or a small operating range.
  • The wetted material can be matched to the medium: plastic, lined metal, stainless steel, or a specified elastomer.
  • The installation can accept a magnetic-drive pump or an ISO 2858 dimensional replacement, whichever fits the space and maintenance practice.

We exclude

  • Refinery or petrochemical main-process packages requiring API 610 scope.
  • Concentrated nitric acid, hydrofluoric acid, or other media needing a specialty alloy outside the offered material set.
  • Heavy slurry or abrasive solids that require a slurry pump rather than a clear-liquid chemical pump.
  • Hazardous-area installation without a verified conformity assessment for the destination.

Please provide

  • Bath or fluid name, concentration, specific gravity, and temperature.
  • Required flow in m³/h and head in m, plus NPSH available.
  • Tank arrangement, suction lift, and whether the pump runs continuously.
  • Existing pump model, footprint, flange standard, and motor voltage/Hz.
  • Material restrictions from the process owner or EHS team.

Questions

Before you send the form

Is a magnetic-drive pump suitable for hot sulfuric acid?

It can be, but the answer depends on concentration, temperature, wetted material, and motor cooling. Share the bath conditions and we will confirm whether a magnetic-drive or lined pump is the safer selection.

Can you match the existing pump footprint?

Send the current model, a footprint drawing, and flange details. An ISO 2858 replacement is checked dimension by dimension before it is proposed.

What is the smallest next step?

A selection review based on the bath data and a photo or drawing of the pump position. A sample is not meaningful for a pump; the useful first step is the duty-point check.

Related applicationISO 2858 chemical pumps for footprint-based replacement

Next step

Get a pump selection review

Describe the process problem and the operating values you already know. We will confirm fit or state the boundary.

  • One low-friction next step: sample, drawing, selection, or quote.
  • Engineering questions come before price or delivery discussion.
  • No public file upload. Drawings and SDS files move by email after first contact.

Your details are used only to answer this inquiry. Read the Privacy notice.

No file uploads in this form. Reply to our email to share drawings, SDS files, or datasheets safely.