Division 02 · Chemicals

Select the formulation layer before the grade

A platform intermediate, a surfactant series, and an application auxiliary solve different problems. We separate the three layers, then match the ionic type, HLB, cloud point, hydroxyl value, or process problem to the requirement. APEO-free alternatives are available for restricted markets.

Applications

Find the closest process page

If none of these pages match, describe the requirement directly. The page is a starting point, not a catalogue boundary.

Agrochemical Emulsifiers

Emulsion stability starts with the emulsifier system

An agrochemical emulsifier is not a single additive. It is a system matched to the active ingredient, solvent, water hardness, and storage condition. The useful inquiry states the formulation layer and the failure mode, not only a product name.

Open the application page

Coatings Additives

Craters and foam are interface problems

A coating defect that appears as a crater, pinhole, or trapped foam is usually an interface problem, not a missing additive. The resin, substrate, surfactant load, application method, and film thickness decide whether a wetting agent or defoamer will help.

Open the application page

Detergent Surfactants

The right surfactant depends on the wash problem

Detergency is a balance of wetting, emulsification, soil removal, foam control, and electrolyte tolerance. The same surfactant series can behave differently across temperature, water hardness, and builder system. Selection has to start from the wash condition.

Open the application page

PCE Macromonomers

Water-reducer performance starts at the macromonomer

Polycarboxylate ether performance depends on the polyether macromonomer: its molecular weight, distribution, and reactive end group. Two nominally similar macromonomers can produce different slump retention, adsorption, and batch consistency in the final water reducer.

Open the application page

Textile Auxiliaries

Fix the process problem, then choose the surfactant

A textile auxiliary is selected by what it has to do in the bath: wet out a package, penetrate a dense fabric, level a dye, resist alkali, or reduce foam. The ionic type, cloud point, and restricted-substance status follow from that process step.

Open the application page

Fit and boundaries

What we need, and what we do not claim

Fit conditions

  • The formulation layer is known: platform intermediate, surfactant series, or application auxiliary.
  • Key values are available: ionic type, HLB, cloud point, hydroxyl value, solid content, or pH.
  • The process problem is stated in application terms: wetting, emulsification, leveling, foam, dispersion, or water reduction.

Exclusions

  • Finished consumer or brand formulations.
  • Regulatory registration or notification for the buyer's destination market.
  • Guaranteed performance in a customer formula without a joint laboratory trial.
  • Grades requiring a verified food, pharmaceutical, or hazardous-area conformity scope that is not available for the inquiry.

Qualification fields

  • Application and process step.
  • Target ionic type and HLB or equivalent selection value.
  • Active content, solid content, or hydroxyl value.
  • Solvent, pH, temperature, and compatibility constraints.
  • Destination market and applicable restricted-substance requirements.

Next step

Request a sample and technical data

Share the process data below. A specific medium, duty point, grade, or application method lets us confirm fit instead of guessing.

  • One low-friction next step: sample, drawing, selection, or quote.
  • Engineering questions come before price or delivery discussion.
  • No public file upload. Drawings and SDS files move by email after first contact.

Your details are used only to answer this inquiry. Read the Privacy notice.

No file uploads in this form. Reply to our email to share drawings, SDS files, or datasheets safely.