Coatings Additives

Craters and foam are interface problems

A coating defect that appears as a crater, pinhole, or trapped foam is usually an interface problem, not a missing additive. The resin, substrate, surfactant load, application method, and film thickness decide whether a wetting agent or defoamer will help.

The process problem

Coatings Additives

A waterborne coating crawls on a contaminated substrate, foams during mixing, or traps air in a thick film. Adding more wetting agent can stabilize foam; adding more defoamer can create craters. The additive system has to be balanced against the whole formula.

Scope

Substrate wetting, dynamic surface tension reduction, foam control, and compatibility screening for architectural, industrial, and wood coatings.

Product family

Alkynol-based and nonionic wetting agents, silicone and mineral-oil defoamers, and compatibility auxiliaries for waterborne and solventborne systems.

Qualification

Fit conditions and honest boundaries

The inquiry is useful only when the process data is specific enough to make a selection or reject the duty.

This page fits when

  • The resin system, substrate, and application method are stated.
  • The defect is described with a photo or test method: crater, pinhole, foam, or flow problem.
  • The current surfactant and defoamer load are known.
  • A small let-down and drawdown trial is possible before production.

We exclude

  • A complete coating formula supplied as a finished product.
  • A performance guarantee without a drawdown or application trial.
  • Food-contact, medical, or potable-water conformity scope.
  • Substitution into a formula without compatibility and storage testing.

Please provide

  • Resin chemistry and coating type.
  • Substrate and surface preparation.
  • Application method and wet film thickness.
  • Current wetting agent, defoamer, and surfactant load.
  • Defect description, test method, and acceptance criterion.

Questions

Before you send the form

Should I add wetting agent or defoamer first?

Diagnose the defect first. A crater may be a wetting or contamination problem; foam may be a mixing or surfactant problem. Adding both without a trial can make the defect worse.

Are your additives suitable for waterborne systems?

Several series are intended for waterborne systems, but compatibility depends on the resin, pH, and co-solvent. A let-down and storage test is required.

Can you match an imported additive?

Provide the technical data sheet, current dose, and defect photos. We can propose a functional alternative, but we do not claim an identical formulation without a trial.

Related applicationTextile wetting and pretreatment auxiliaries

Next step

Request a wetting and defoamer sample kit

Tell us the grade, application, and current product function. A relevant sample plus technical data is the smallest useful next step.

  • One low-friction next step: sample, drawing, selection, or quote.
  • Engineering questions come before price or delivery discussion.
  • No public file upload. Drawings and SDS files move by email after first contact.

Your details are used only to answer this inquiry. Read the Privacy notice.

No file uploads in this form. Reply to our email to share drawings, SDS files, or datasheets safely.