Pickling & Wastewater

Keep the acid moving without moving the leak downstream

Pickling lines and wastewater stations concentrate the two conditions that shorten pump life: corrosive chemistry and abrasive or crystallizing solids. The selection has to separate clear acid transfer from slurry-like wastewater and choose the right material, seal method, and installation arrangement for each.

The process problem

Pickling & Wastewater

Acid pickling, rinse water, waste acid, lime slurry, and neutralized wastewater are often handled by whatever pump is available. The result is a short service life, leakage at the seal, clogging at the suction, and a maintenance team that cannot isolate the real cause.

Scope

Pickling-bath circulation, acid transfer, rinse boosting, waste-acid holding, neutralization, flocculant dosing, and treated-water transfer.

Product family

Magnetic-drive chemical pumps for clear acid, lined ISO 2858 pumps for larger flows, and wastewater pumps for solids-bearing streams.

Qualification

Fit conditions and honest boundaries

The inquiry is useful only when the process data is specific enough to make a selection or reject the duty.

This page fits when

  • The stream is identified as clear acid, rinse water, slurry, or dosing chemical.
  • Solids content, particle size, and settling behavior are stated for wastewater streams.
  • Material and seal method can be selected separately for acid service and solids-bearing service.
  • The installation has enough suction head or can be arranged for a self-priming or submersible option where needed.

We exclude

  • Heavy mineral slurry or mill-scale duty requiring a dedicated slurry pump.
  • High-pressure reverse-osmosis feed or membrane stages.
  • Concentrated nitric or hydrofluoric acid service outside the offered material set.
  • Refinery main-process packages requiring API 610 scope.

Please provide

  • Stream description: acid, rinse, waste acid, lime slurry, or treated water.
  • Concentration, pH, temperature, specific gravity, and solids content.
  • Flow in m³/h, head in m, and suction arrangement.
  • Batch or continuous operation and expected dry-run behavior.
  • Existing pump, piping material, and motor voltage/Hz.

Questions

Before you send the form

Can one pump handle both waste acid and neutralized slurry?

Usually not well. Clear acid and solids-bearing wastewater call for different hydraulics and materials. We prefer to split the duty or select a pump with a stated solids limit.

Do you need a P&ID before selecting a pump?

A marked-up P&ID or a simple sketch helps. At minimum, provide the stream, flow, head, temperature, solids content, and suction arrangement.

What if the flow changes through the batch?

State the minimum and maximum flow and whether the pump will run at both ends. A fixed-duty pump may need a control valve, VFD, or a different hydraulic selection.

Related applicationChemical pumps for anodizing and plating lines

Next step

Request a layout and selection drawing

Share the layout, duty point, or interface data. A marked-up drawing or selection check comes before a quotation.

  • One low-friction next step: sample, drawing, selection, or quote.
  • Engineering questions come before price or delivery discussion.
  • No public file upload. Drawings and SDS files move by email after first contact.

Your details are used only to answer this inquiry. Read the Privacy notice.

No file uploads in this form. Reply to our email to share drawings, SDS files, or datasheets safely.